Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325

Follow us on

7 March, 2018

Elscint Vibratory Bowl Feeder for various parts of a syringe

Elscint recently manufactured a set of three Vibratory Bowl Feeder for feeding of three separate plastic parts, namely, cap, plunger and barrel. There were part of a syringe and the customer required automatic feeding for his assembly line where the syringe was filled and packed. As the dimensions of each of the parts were different, Elscint suggested separate models for each of these parts. The cap, being just 18 mm x 10 mm ht. was fed in Model 250 with the flange up / bowl side down orientation. The plunger was having diameter 12 mm x 70 mm length. This was required in head up orientation on a rail. For this, Model 400 was used while Model 630 was used for the barrel which as having diameter 20 mm x 145 mm length. This too was required in head up orientation. Further, in all cases, a linear vibrator was required for conveying the part forward. The track length was 650 mm in all the three cases. Further, this being a medical part, all the parts, including the bowl, table, mounting base plate etc were required in stainless steel. Elscint used 50 x 50 stainless steel square tube pipe structure for the stands. Even the linear vibrator mounting plates were made in stainless steel. You can watch the video of the Barrel bowl feeder.

Monish Shet

Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.

Leave a Reply

Your email address will not be published. Required fields are marked *