MAP

Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325
: sales@elscintautomation.com

Follow us on


6 April, 2010

Vibratory Bowl Feeder feeds Nuts and Bolts together

Normally vibratory bowl feeders are made for either bolts or nuts due to the intrinsic nature of the tooling required for each type of component. Both cannot be fed in the same bowl feeder. However, this is now possible with the help of a very complicated tooling but with slight changeover tooling. Bolts from size M 4 to M 14 and Nuts from M4 to M30 can be fed through the same vibratory parts feeder. This can help fastener manufacturers attain a lot of flexibility and adaptability with regard to their vibratory bowl feeders. In order to feed the nuts, the tooling for the bolts needs to be removed and replaced with a different type of tooling which will be used for feeding of the nuts. Of course, side adjustments for accommodating various nuts and bolts will still have to be done for the various sizes

Monish Shet

Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.


Comments are closed.