MAP

Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325
: sales@elscintautomation.com

Follow us on


31 August, 2009

Preventive maintenance of a Vibratory Bowl Feeder

Good Vibratory Bowl Feeders are generally maintenance-free. They should only be thoroughly cleaned when they are considerably dirty or after fluids i.e. oil / coolant / water etc. have been spilled over them.

  • While doing this, first unplug the mains plug.
  • Remove the Cover (Guard) covering the Base Unit / Drive Unit of the Vibratory Feeder.
  • Clean the inside of the Vibratory Bowl Feeder, especially the gap between the Coil and Magnet
  • Check the Gap between the Magnet and the Coil. It should be maintained as given in the maintenance manual of the manufacturer.
  • Tighten all Screws, as they have a tendency of getting loose due to Vibrations over time.
  • After mounting the Cover (Guard) and plugging in the mains plug, the Vibratory Bowl Feeder is ready for operation again.
Monish Shet

Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.


Comments are closed.