MAP

Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325
: sales@elscintautomation.com

Follow us on


22 November, 2011

Innovative Usage of Vibratory Feeders – Vibratory Bowl Feeder feeds Nuts and Bolts together

Normally Vibratory Bowl Feeders are made for either Bolts or Nuts due to the intrinsic nature of the tooling required for each type of component. However, Elscint has developed a special type of Vibratory Bowl Feeder which can feed various types of Nuts and Bolts in the same Vibratory Bowl Feeder with slight changeover tooling. Bolts from size M 4 to M 14 and Nuts from M4 to M30 can be fed through the same Vibratory Bowl Feeder. This helps fastener manufacturers attain a lot of flexibility and adaptability with regard to the Vibratory Bowl Feeders. The changeover tooling is made in such a way that a range of bolts and nuts are fed in the same bowl feeder. The outlet of the nuts is blocked while feeding the bolts and while feeding the bolts, the outlet of the nuts is blocked. This makes the changeover tooling very easy.

Monish Shet

Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.


Comments are closed.