MAP

Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325
: sales@elscintautomation.com

Follow us on


22 April, 2012

Innovative Usage of Vibratory Bowl Feeders – Vibratory Bowl Feeder for Sintered “E” Cores

Feeding of sintered parts presents a very tricky challenge in the case of vibratory feeders. The reason being that these are fragile and even a very small fall from the from the top of the bowl can break them. Due to this reason, a special type of lining / coating is required if these require to be fed in a bowl feeder. The Elscinthane PU coating is most suitable and requires extra thickness. Further the Bowl too is required to be designed in such a manner that the possibility of a fall is reduced if not eliminated. If the components do fall during orientation, the fall is contained by specially designed flaps.

Monish Shet

Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.


Leave a Reply

Your email address will not be published. Required fields are marked *