MAP

Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325
: sales@elscintautomation.com

Follow us on


9 November, 2013

Innovative Usage of Vibratory Bowl Feeders – Vibratory Bowl Feeder, Escapement and Blow Feed System for small Al Plugs

Elscint has developed an innovative feeding system for feeding of small taper aluminium plugs. The plugs were having a diameter of 7.2 mm on one end and 7 mm on another. The length was just 8 mm. As the orientation required was smaller diameter forward, Elscint provided a motorized roller orientation unit ahead of the bowl. This ensured that the orientation was hundred percent correct. Thereafter the al plugs were dropped in a tube and an escapement / singulator was provided to release only one plug at a time on receipt of a signal from the customer’s end. After the release, the plugs were blow fed to a height of 3 metres where they were used for assembly. All this system along with the pneumatic and electrical controls was provided by Elscint, making it a plug and play solution for the customer.

Monish Shet

Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.


Comments are closed.