MAP

Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325
: sales@elscintautomation.com

Follow us on


13 February, 2016

Innovative Usage of Vibratory Bowl Feeders – Feeding of Plastic Rivets in four outlets

Elscint recently completed a set of 2 bowl feeders for feeding of plastic rivets clips. The rivets were to be fed in four outlets at a centre distance of 50 mm from each other. Elscint recommended Model 250 EV bowl for feeding of the rivets with two outlets each, thus using two bowl feeders. The speed required was 80 rivets per minute per outlet. Thereafter the rivets were to be carried forward on a single linear vibrator with 4 tracks. As there were 2 tracks per bowl, proper overflow arrangement was required, which was provided with airjets. Sensors were placed on all the 4 tracks to ensure that once both the tracks are full, the respective bowl feeders were stopped.

Monish Shet

Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.


Comments are closed.