MAP

Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325
: sales@elscintautomation.com

Follow us on


6 July, 2014

Innovative Usage of Vibratory Bowl Feeders – Feeding of long parts

Elscint recently completed an order for feeding of components related to the stationary industry. One part was for feeding of “compressor bar”, which is used in box files. The requirement was to get these parts which were having length of 130 mm x 18 mm width in lengthwise position with “face orientation” ensuring that the plastic lock was always at the top. The customer also wanted to eliminate the parts where the parts were “locked” i.e. the lock was down. When the parts were “locked”, the height of the part with face up and face down was same, leading to difficulty in eliminating the same. However, Elscint provided a special type of tooling to ensure that the “locked” parts too get eliminated. Elscint used it Model 400 with a stainless steel step type bowl with Elscinthane PU coating for this purpose. A speed of 50 parts per minute was achieved. You can watch the video of this equipment

Monish Shet

Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.


Comments are closed.