MAP

Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325
: sales@elscintautomation.com

Follow us on


2 May, 2015

Innovative Usage of Vibratory Bowl Feeders – Elscint Vibratory Bowl Feeder for feeding large inclined plastic caps

Elscint recently supplied a vibratory bowl feeder for feeding of large inclined plastic caps. The caps were having a diameter of 35 mm. The height on one side was 50 mm while on other side, it was 43 mm. Due to this there was a tendency of the caps getting locked or falling down in the inclined gravity chute. The requirement was to feed the caps at a speed of 130 caps per minute in “open side down orientation”. Elscint used its Model 400 HD with a bowl diameter of approximately 800 mm for this purpose. Additionally, a gravity chute, mounting stand and a 125 ltr. extra capacity elevator feeder with a PU slat belt was provided. Usage of air was allowed and air was used to change the orientation from axial to standing with open side. The caps were then twisted in the bowl itself to make them all upside down (open side down).

Monish Shet

Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.


Comments are closed.