MAP

Contact Us

:W-191 & W-192 Bhosari MIDC, Pune 411 026. India
: 020 26831325
: sales@elscintautomation.com

Follow us on


28 October, 2014

Innovative Usage of Vibratory Bowl Feeders – Elscint delivers Vibratory Bowl Feeder for large Plastic Caps to Israel

Elscint recently supplied a large vibratory bowl feeder for large plastic caps to a company in Israel. There were two types of caps, one having diameter of 90 mm and one having diameter of 60 mm. The feed rate or speed required was 50 caps per minute for each of them. Elscint provided separate changeover tooling for these two sizes and the speed achieved was 60 caps per minute for the bigger size caps and 80 caps per minute for the dia 60 mm caps. The orientation required was open side facing ground and the same was achieved. Additionally, Elscint provided a gravity chute with an auto-switch off mechanism along with a stopper for the caps. A pressing conveyor too was included as part of the complete equipment. Model VBF 630 with a stainless steel bowl having diameter of almost 1100 mm was used for this purpose and the same was delivered to Israel by air freight. As against a committed delivery time of 6 weeks, Elscint completed the order in less than 4 weeks.

You can watch the video of this bowl feeder for feeding of the small dia 60 mm caps and for the one for the dia 90 mm caps

Monish Shet

Monish Shete is CEO of Elscint Automation, a 30 year old firm manufacturing vibratory bowl feeders and similar small part handing products. He personally has more than 25 years experience with last 15 years being with Elscint. This blog will help customers and laymen understand the intricacies of vibratory bowl feeders. One can find information about the finer aspects of vibratory bowl feeders which cannot be found anywhere else. Case studies and information about various innovative ways of feeding and orienting of different parts are given in this blog.


Comments are closed.